IP5X & IP6X Ingress Protection Testing Equipment
![]()
Product Overview
Dust is one of the most common environmental factors that affects product reliability, especially for outdoor and industrial applications. It does not usually cause immediate failure, but gradually enters through sealing gaps and leads to connector issues, sensor malfunction, or internal contamination.
The SC-500 and SC-1000 sand and dust test chambers are designed to reproduce this kind of environment in a controlled and repeatable way. The equipment is used to evaluate the ingress protection performance of housings, enclosures, and electronic assemblies under standardized dust exposure conditions.
The system is built in accordance with IEC 60529 IP5X and IP6X test requirements. By controlling dust circulation, airflow, and vacuum conditions, it allows engineers to verify whether a product can maintain sealing integrity before entering mass production or certification testing.
Key Features
- IEC 60529 Standard Dust Testing
The system is designed for IP5X and IP6X testing in accordance with IEC 60529. It uses controlled talcum powder circulation and regulated airflow to maintain stable dust exposure conditions throughout the test cycle.
- Practical Control for Lab Operation
The control system is based on a touchscreen interface. Test parameters such as dust cycle, vacuum level, temperature, and timing can be set directly without complex programming.
Dust circulation and airflow are designed to remain stable during long test cycles. This is important for ensuring that results remain consistent between different test batches.
The chamber is equipped with a tempered glass observation window and internal lighting, allowing operators to monitor the test process without opening the chamber.
The internal chamber is made of stainless steel to resist abrasion from long-term dust exposure. The structure is designed for continuous laboratory or production testing environments.
Technical Specifications
| Parameter |
SC-500 |
SC-1000 |
| Internal Size |
800 × 800 × 800 mm |
1000 × 1000 × 1000 mm |
| External Size |
1200 × 1050 × 1730 mm |
1400 × 1250 × 1950 mm |
| Test Standard |
IEC 60529 / ISO 20653 / SAE J575 |
Same |
| Dust Type |
Dry talcum powder |
Dry talcum powder |
| Dust Concentration |
2–4 kg/m³ |
2–4 kg/m³ |
| Vacuum Range |
0–10 kPa |
0–10 kPa |
| Airflow Range |
0–4800 L/H |
0–4800 L/H |
| Temperature Range |
Room temperature to 40°C |
Same |
| Humidity |
<30% RH |
<30% RH |
| Test Duration |
0–999 hours |
0–999 hours |
| Power Supply |
AC 220V 50Hz |
AC 220V 50Hz |
Applications
The SC series is used in reliability testing and quality control departments where dust resistance needs to be verified before product release.
Typical applications include:
1.Consumer electronics such as smartphones, wearable devices, and outdoor equipment
2.Automotive electronics including sensors, lighting systems, and control modules
3.Outdoor electrical enclosures and distribution boxes
4.LED lighting systems used in outdoor environments
5.Industrial equipment exposed to dusty operating conditions
Why Choose ITM-LAB
The main requirement for dust ingress testing is repeatability. Test conditions must remain stable so that results can be compared across different batches or used for certification submission.
The SC series is designed with this requirement in mind. It provides stable control of dust circulation, airflow, and vacuum conditions to ensure consistent test results over long operating cycles.
Customization is available for applications requiring special ports, live power testing, or non-standard chamber dimensions.
Contact
If you are selecting equipment for IP5X or IP6X testing, we can assist in choosing the appropriate model based on sample size and testing requirements.
Contact us for technical specifications, configuration options, and quotation support.
